White Racker Co.
420 S. Lively Boulevard
Elk Grove Village, IL 60007

Phone: 847-758-1640
Fax: 847-758-1741


Parts for Standards

   
 

No. 231
Rail End
 

No. 232
Continuous Rail

No. 233
Corner Rail
 

No. 234
Three Way Rail
 

No. 235
Four Way Rail
 
Ball Tops have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
 

No. 236
Partition End
 

No. 237
Continuous Partition
 

No. 238
Three Way Partition
 

No. 239
Corner

lower left hand,
upper right hand
 

No. 240
Corner

lower right hand,
upper left hand
                 
No. 242
Tubing Post
1 1/4" diameter, threaded both ends
 
No. 244
Floor Flange
2 7/8" diameter, tubing connection
1 1/4" diameter, threaded for No. 242 tubing post. Center pin 1/2" diameter extends into floor 1/2".
No. 249
Spiking Combing
Used in school building to discourage acrobatics on the rail. In one foot lengths, 1/2" high, 1/2" thick at base. Supplied with machine screws; rail is drilled and tapped after installation.
   
 


No. 231-A
45-Degree Wall Flange

Tubing connection slip fit, with set screw for No. 192 (1-1/4"dia.) tubing
 

No. 237-A
45-Degree Partition Clamp

For continuous partition 7/8" to 1-1/4" thick, tubing connection threaded for 1-1/4" tubing.
(See No. 242)
 

No. 55-A
45-Degree Wall Flange

Tubing connection slip fit, with set screw for 192 (1-1/4" dia.) tubing.
         

No. 55-A
45-Degree Wall Flange

Tubing connection slip fit, with set screw for No. 192 (1-1/4" dia.) tubing.
 

No. 50
Tube Tie

For No. 191 (1-1/8" dia.) tubing at right angel to partition. For partition thickness 7/8" to 1-1/4".
 

No. 51
Tube Tie

For No. 191 (1-1/8" dia.) tubing in line with partition. For partition thickness 7/8" to 1-1/4".
         

No. 53
End Plug

For No. 191 (1-1/8" dia.) tubing.
       

 

Internet Advertising & Brand Consulting By Futurism Technologies