420 S. Lively Boulevard
Elk Grove Village, IL 60007
Phone: 847-758-1640
Fax: 847-758-1741
Standards & Rails
| Top and Bottom
Standards conform to Federal specification FF-H-136, typenumber as indicated.
Top Standards 12" high unless, otherwise ordered. When higher standards are
ordered, prices will be adjuste in accordance with additional amount of tubing
used in the tubing posts, on the basis of prices for 1 1/2" tubing. Height is
measured from top of partition to center of rail for top standards and from
floor to lower edge of partition for bottom standards. Ball top rail fittings are regularly made to carry 1 1/4" diameter rail but will also be furnished for 1 1/8" and 1" rail when so ordered. In all cases, tubing posts are 1 1/4" outside diameter. When ordering standards, please give dimensions in the following order: first, the height; second, the thickness of the stile; and third, the thickness of the partition in case the standard in question fits over a partition. Also in case of corner standards, as No. 108 and 93, specify right or left hand corner if the thickness of the stile and partition are different. Example: No. 108; 9" x 1 1/4" x 7/8" right hand. The hand is determined by standing outside and facing the stall. Made for stiles and partitions 7/8" to 1 1/4" thick. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
  |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
