420 S. Lively Boulevard
Elk Grove Village, IL 60007
Phone: 847-758-1640
Fax: 847-758-1741
Shower Room Fittings
Shower Curtain Rods
 Rod No. 200-A 1 inch diameter, slip fit with set screws in end brackets. Surface mounted on inside of stall, allow curtain to overlap opening. Flange 2 7/8" x 1 1/2". Supplied with thru-bolts. |
 Rod No. 200 1 inch diameter, slip fit with set screws in end brackets. Fits into opening, with flange on inside of stall only. Flange 2 7/8" x 1 1/2". Supplied with thru-bolts. |
|
 Rod No. 204 1 inch diameter, flanges 2 5/8" diameter, center of rod 2 1/2 inches from face partition. This rod is made 4 inches longer than the width of opening, measured from center of flanges. Supplied with thru-bolts. |
 Rod No. 202 1 inch diameter, friction fit into ball end brackets. Diameter of flange 2 1/2 inches, center of rod 1 1/2 inches from face of partition. Rod is made 4 inches longer than width of opening, measured from center to center of ball ends. Supplied with thru-bolts. |
|
 Rod No. 203 1 inch diameter, slip fit with screws in flanges. Flanges 2 5/8" diameter. Supplied with wood screws and expansion sleeves. |
 Rod No. 201 1 1/4" diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. Conforms to Federal Specifications FF-H-136 Type 4055. |
|
 Rod No. 246 1 1/4" diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions E and K. Supplied with thru-bolts. Conforms to Federal Specification FF=H-136 type 4056. |
 Rod No. 0246 1 1/4" diameter, threaded connections with end fittings. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. |
|
|
|
Description | |
 |
|
|
for attaching curtain rod to metal locker. Connection for 1" diameter tubing. |
 |
|
|
for 1" diameter tubing. |
 |
|
|
for No. 200 Rod. When finished on reverse side may be used as in No. 200-A. |
 |
|
|
for No. 202 Rod. Requires only one bolt through partition. Can be supplied with two openings for continuous rods. |
Rod Connections
 No. 227 R. H |
 No. 227 L. H |
 No. 229 |
 No. 236-x |
|||
 No. 236-A R. H. |
 No. 236-A L. H. |
 No. 236-C R. H. |
 No. 236-C L. H. |
|||
 No. 228 |
 No. 0228 |
 No. 228-A |
 No. 236-B |
|||
For 1 1/4" tubing, see No. 192. All connections threaded. Made for partitions 7/8 inch to 1 1/4" inches in thickness. |
||||||
Wall Flanges |
||
 No. 55 Wall Flange For No. 192 (1-1/4" diameter) rail, slip fit with set screw. Diameter of flange 2-3/4". Fastenings wood screws and lead expansion anchors. No 54. Similar to No. 55, for No. 191 (1-1/8" diameter) rail. No. 56. Similar to No. 55 for No. 193 (1" diameter) rail. |
 No. 055 Offset Flange For No. 192 (1-1/4" diameter) rail, slip fit with set screw. Overall dimensions 2-7/8" x 3-1/3". No. 054. Similar to No. 55, for No. 191 (1-1/8" diameter) rail. No. 056. Similar to No. 55 for No. 193 (1" diameter) rail. |
|
Top Rail |
||
 No. 192 Tubing 1-1/4" outside diameter, .045" thick, cut to dimension. |
No. 191 Tubing 1-1/8" outside diameter, .045" thick, cut to dimension. |
|
|
No. 193 Tubing 1" outside diameter, .045" thick, cut to dimension. |
||