2
Yes
None
1
Name...
/products/
Thumbnail
Filter
Sort By:

Categories:

Sub-Categories:

Marble Toilet Partition Hardware
Rod, #246
Rod, #246 Image
1 1/4 inch diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions E and K. Supplied with thru-bolts. Conforms to Federal Specification FF=H-136 type 4056. Standard width is 24"
Rod, #0246
Rod, #0246 Image
1 1/4 inch diameter, threaded connections with end fittings. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. Standard width is 24"
Bracket, #45 R.H
Bracket, #45 R.H Image
For Attaching curtain rod to metal locker. Connection for 1" diameter tubing
Three Way Connection, #46
Three Way Connection, #46 Image
For 1" diameter tubing.
End Bracket, #200-X
End Bracket, #200-X Image
For No. 200 Rod. When finished on reverse side may be used as in No. 200-A.
End Bracket, #202-X
End Bracket, #202-X Image
For No. 202 Rod. Requires only one bolt through partition. Can be supplied with two openings for continuous rods.
Bracket, #45 L.H
Bracket, #45 L.H Image
For Opposite Corner
Rod, #200
Rod, #200 Image
1 inch diameter, slip fit with set screws in end brackets. Fits into opening, with flange on inside of stall only. Flange 2 7/8" x 1 1/2". Supplied with thru-bolts. Standard width is 24
Rod, #204
Rod, #204 Image
1 inch diameter, flanges 2 5/8" diameter, center of rod 2 1/2 inches from face partition. This rod is made 4 inches longer than the width of opening, measured from center of flanges. Supplied with thru-bolts. Standard width is 24"
Rod, #202
Rod, #202 Image
1 inch diameter, friction fit into ball end brackets. Diameter of flange 2 1/2 inches, center of rod 1 1/2 inches from face of partition. Rod is made 4 inches longer than width of opening, measured from center to center of ball ends. Supplied with thru-bolts. Standard width is 24"
Rod, #203
Rod, #203 Image
1 inch diameter, slip fit with screws in flanges. Flanges 2 5/8" diameter. Supplied with wood screws and expansion sleeves. Standard width is 24"
Rod, #201
Rod, #201 Image
1 1/4 inch diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. Conforms to Federal Specifications FF-H-136 Type 4055. Standard width is 24"
Marble Toilet Partition Hardware
Rod, #246 Image
Rod, #246
1 1/4 inch diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions E and K. Supplied with thru-bolts. Conforms to Federal Specification FF=H-136 type 4056. Standard width is 24"
Rod, #0246 Image
Rod, #0246
1 1/4 inch diameter, threaded connections with end fittings. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. Standard width is 24"
Bracket, #45 R.H Image
Bracket, #45 R.H
For Attaching curtain rod to metal locker. Connection for 1" diameter tubing
Three Way Connection, #46 Image
Three Way Connection, #46
For 1" diameter tubing.
End Bracket, #200-X Image
End Bracket, #200-X
For No. 200 Rod. When finished on reverse side may be used as in No. 200-A.
End Bracket, #202-X Image
End Bracket, #202-X
For No. 202 Rod. Requires only one bolt through partition. Can be supplied with two openings for continuous rods.
Bracket, #45 L.H Image
Bracket, #45 L.H
For Opposite Corner
Rod, #200 Image
Rod, #200
1 inch diameter, slip fit with set screws in end brackets. Fits into opening, with flange on inside of stall only. Flange 2 7/8" x 1 1/2". Supplied with thru-bolts. Standard width is 24
Rod, #204 Image
Rod, #204
1 inch diameter, flanges 2 5/8" diameter, center of rod 2 1/2 inches from face partition. This rod is made 4 inches longer than the width of opening, measured from center of flanges. Supplied with thru-bolts. Standard width is 24"
Rod, #202 Image
Rod, #202
1 inch diameter, friction fit into ball end brackets. Diameter of flange 2 1/2 inches, center of rod 1 1/2 inches from face of partition. Rod is made 4 inches longer than width of opening, measured from center to center of ball ends. Suppli... Read More
Rod, #203 Image
Rod, #203
1 inch diameter, slip fit with screws in flanges. Flanges 2 5/8" diameter. Supplied with wood screws and expansion sleeves. Standard width is 24"
Rod, #201 Image
Rod, #201
1 1/4 inch diameter, threaded connections with end clamps. Specify exact width of opening and thickness of partitions. Supplied with thru-bolts. Conforms to Federal Specifications FF-H-136 Type 4055. Standard width is 24"