2
Yes
None
1
Name...
/products/
Thumbnail
Filter
Sort By:

Categories:

Sub-Categories:

Marble Toilet Partition Hardware
Soap Holder, #957
Soap Holder, #957 Image
Soap holder with wall bracket attached. Overall length 4 1/2", projection 3 1/8", with drain holes. Fastenings, No. 128 spanner head nuts and threaded studs for attachment back to back on shower partitions, or singly with cap nuts or expansion anchors.
Towel & Robe Hook, #973
Towel & Robe Hook, #973 Image
Projection 3 3/8". Fastenings No. 128 spanner-nut and threaded stud for attachment back to back, or singly with cap nuts or expansion anchors. Stud on back of base, let into face of wall or partition, prevents turning of hook.
Hook, #10
Hook, #10 Image
Flange 2 3/4" in diameter, projection 3 1/2". Fastenings No. 128 spanner nuts and threaded studs for attachment back to back or singly with cap nuts or expansion anchors. Federal Specification WW-P-541a Fig. Type 420
Hook & Bumper, #78
Hook & Bumper, #78 Image
With renewable rubber tip; used with inswinging doors, stops door from slamming against partition. Overall length 4 inches, diameter of base 1 7/8". Fastenings, oval-head wood or machine screws as required.
Hook & Bumper, #78-A
Hook & Bumper, #78-A Image
Same as No. 78 except with thru-bolt fastening. Stud on back of flange prevents turning of hook, so it can only be removed from outside of stall.
Door Pull, #79
Door Pull, #79 Image
Used with outswinging stall doors, length overall 4 3/4". Fastenings, oval head wood screws.
Door Pull, #389
Door Pull, #389 Image
For entrance doors, length overall 7 1/2", diameter of flanges 1 1/2 ". Grip 3/8" to 7/8" oval.
Push Plate, #158
Push Plate, #158 Image
For entrance doors, 12" x 3 1/2"
Door Pull, Round Base, #79A
Door Pull, Round Base, #79A Image
Used with outswinging stall doors, length overall 4 1/4". Fastenings, oval head wood screws. Flange Size 1 1/2 in
Marble Toilet Partition Hardware
Soap Holder, #957 Image
Soap Holder, #957
Soap holder with wall bracket attached. Overall length 4 1/2", projection 3 1/8", with drain holes. Fastenings, No. 128 spanner head nuts and threaded studs for attachment back to back on shower partitions, or singly with cap nuts or expans... Read More
Towel & Robe Hook, #973 Image
Towel & Robe Hook, #973
Projection 3 3/8". Fastenings No. 128 spanner-nut and threaded stud for attachment back to back, or singly with cap nuts or expansion anchors. Stud on back of base, let into face of wall or partition, prevents turning of hook.
Hook, #10 Image
Hook, #10
Flange 2 3/4" in diameter, projection 3 1/2". Fastenings No. 128 spanner nuts and threaded studs for attachment back to back or singly with cap nuts or expansion anchors. Federal Specification WW-P-541a Fig. Type 420
Hook & Bumper, #78 Image
Hook & Bumper, #78
With renewable rubber tip; used with inswinging doors, stops door from slamming against partition. Overall length 4 inches, diameter of base 1 7/8". Fastenings, oval-head wood or machine screws as required.
Hook & Bumper, #78-A Image
Hook & Bumper, #78-A
Same as No. 78 except with thru-bolt fastening. Stud on back of flange prevents turning of hook, so it can only be removed from outside of stall.
Door Pull, #79 Image
Door Pull, #79
Used with outswinging stall doors, length overall 4 3/4". Fastenings, oval head wood screws.
Door Pull, #389 Image
Door Pull, #389
For entrance doors, length overall 7 1/2", diameter of flanges 1 1/2 ". Grip 3/8" to 7/8" oval.
Push Plate, #158 Image
Push Plate, #158
For entrance doors, 12" x 3 1/2"
Door Pull, Round Base, #79A Image
Door Pull, Round Base, #79A
Used with outswinging stall doors, length overall 4 1/4". Fastenings, oval head wood screws. Flange Size 1 1/2 in