2
Yes
None
1
Name...
/products/
Thumbnail
Filter
Sort By:

Categories:

Sub-Categories:

Marble Toilet Partition Hardware
Wall Stile Clamp, #902
Wall Stile Clamp, #902 Image
Made for 1 1/4" thick stiles only. Length 4 inches.
End Style Clamp, #904LH
End Style Clamp, #904LH Image
For left hand corner. Made for 1 1/4" thick stiles and partitions 7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8", side 3 5/8" in width, height 2 3/4".
End Style Clamp, #904RH
End Style Clamp, #904RH Image
For right hand corner. Made for 1 1/4" thick stiles and partitions 7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8", side 3 5/8" in width, height 2 3/4".
Tee Clamp, #913
Tee Clamp, #913 Image
For adjoining stiles, 1 1/4" both ways
Tee Clamp, #912
Tee Clamp, #912 Image
For 1 1/2" stile and 7/8" or 1" partition, used with No. 907 Channel.
Corner Clamp, #914
Corner Clamp, #914 Image
For adjoining stiles, 1 1/4" both ways
Wall Flange, #910
Wall Flange, #910 Image
For No. 908 Top Rail. Overall Dimensions 3 1/4" x 3 1/4".
Wall Stile Clamp, #911
Wall Stile Clamp, #911 Image
With expansion anchor. For 1 1/4" stiles only, width 2". Used in place of No. 902 when wall stile is not let into the wall, as with glazed brick walls.
Top Brace, #1003
Top Brace, #1003 Image
Overall dimensions 4 1/4" high x 4 1/2" wide, made for 7/8" thick partitions only.
Double Angle, #1002
Double Angle, #1002 Image
Dimensions 4 1/4" x 1 3/4" x 1 3/4".
Square Top Rail, #908-A
Square Top Rail, #908-A Image
No. 16 B & S Gauge, cut to dimensions as specified. Can be slotted to receive front stiles. Heavier gauges are available upon request, but require special handling and extra expense. 1 1/8" x 1 1/8". For use over 1 1/8" thick stiles
Square Top Rail, #908-B
Square Top Rail, #908-B Image
No. 16 B & S Gauge, cut to dimensions as specified. Can be slotted to receive front stiles. Heavier gauges are available upon request, but require special handling and extra expense. 1 1/2" x 1 1/2". Usually slotted to receive front stiles. stiles
End Partition Top Channel, #907
End Partition Top Channel, #907 Image
Made to fit over end partition which is carried up a half-inch higher than stile, for 7/8" or 1" thick partitions only. A steel bar extends continuously though the channel and is attached with machine screw to the No. 904 Stile Clamp in front and imbedded into the wall at the back of the partition. When ordering, specify distance from back of stile to face of wall
Center Stile Clamp, #903
Center Stile Clamp, #903 Image
Made for 1 1/4" thick stiles only. Length 3 inches. This is usually imbedded into the wall 1 inch, leaving 2 inches exposed.
Marble Toilet Partition Hardware
Wall Stile Clamp, #902 Image
Wall Stile Clamp, #902
Made for 1 1/4" thick stiles only. Length 4 inches.
End Style Clamp, #904LH Image
End Style Clamp, #904LH
For left hand corner. Made for 1 1/4" thick stiles and partitions 7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8", side 3 5/8" in width, height 2 3/4".
End Style Clamp, #904RH Image
End Style Clamp, #904RH
For right hand corner. Made for 1 1/4" thick stiles and partitions 7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8", side 3 5/8" in width, height 2 3/4".
Tee Clamp, #913 Image
Tee Clamp, #913
For adjoining stiles, 1 1/4" both ways
Tee Clamp, #912 Image
Tee Clamp, #912
For 1 1/2" stile and 7/8" or 1" partition, used with No. 907 Channel.
Corner Clamp, #914 Image
Corner Clamp, #914
For adjoining stiles, 1 1/4" both ways
Wall Flange, #910 Image
Wall Flange, #910
For No. 908 Top Rail. Overall Dimensions 3 1/4" x 3 1/4".
Wall Stile Clamp, #911 Image
Wall Stile Clamp, #911
With expansion anchor. For 1 1/4" stiles only, width 2". Used in place of No. 902 when wall stile is not let into the wall, as with glazed brick walls.
Top Brace, #1003 Image
Top Brace, #1003
Overall dimensions 4 1/4" high x 4 1/2" wide, made for 7/8" thick partitions only.
Double Angle, #1002 Image
Double Angle, #1002
Dimensions 4 1/4" x 1 3/4" x 1 3/4".
Square Top Rail, #908-A Image
Square Top Rail, #908-A
No. 16 B & S Gauge, cut to dimensions as specified. Can be slotted to receive front stiles. Heavier gauges are available upon request, but require special handling and extra expense. 1 1/8" x 1 1/8". For use over 1 1/8" thick stiles
Square Top Rail, #908-B Image
Square Top Rail, #908-B
No. 16 B & S Gauge, cut to dimensions as specified. Can be slotted to receive front stiles. Heavier gauges are available upon request, but require special handling and extra expense. 1 1/2" x 1 1/2". Usually slotted to receive front stiles.... Read More
End Partition Top Channel, #907 Image
End Partition Top Channel, #907
Made to fit over end partition which is carried up a half-inch higher than stile, for 7/8" or 1" thick partitions only. A steel bar extends continuously though the channel and is attached with machine screw to the No. 904 Stile Clamp in fro... Read More
Center Stile Clamp, #903 Image
Center Stile Clamp, #903
Made for 1 1/4" thick stiles only. Length 3 inches. This is usually imbedded into the wall 1 inch, leaving 2 inches exposed.