Marble Toilet Partition Hardware
Rail End, #231
Ball Tops Have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
Images
Continuous Rail, #232
Ball Tops Have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
Images
Corner Rail, #233
Ball Tops Have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
Images
Three Way Rail, #234
Ball Tops Have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
Images
Four Way Rail, #235
Ball Tops Have 1 1/4" vertical tubing connection threaded for No. 242 tubing post; horizontal connections are slip fit, with set screw for No. 192 (1 1/4" diameter) rail, or for No. 191 or No. 193 rail when so ordered.
Images
Partition End, #236
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post.
Images
Continuous Partition, 237
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post.
Images
Three Way Partition, #238
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post.
Images
Corner, #239
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post. Lower left hand, upper right hand
Images
Corner, #240
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post. Lower right hand, upper left hand
Images
Four way Partition, #241
Clamp Fittings are made for Partition thickness 7/8" to 1 1/4"; tubing connection 1 1/4 diameter, threaded for No.242 tubing post.
Images
Floor Flange, #244
2 7/8" diameter, tubing connection 1 1/4" diameter, threaded for No. 242 tubing post. Center pin 1/2" diameter extends into floor 1/2"
Images
Tubing Post, #242
1 1/4" diameter, threaded both ends
Images
45-Degree Wall Flange, #231-A
ILLUSTRATION AT LEFT Shows a public school installation with diagonal bracing and spiked combing on the top rail. Threaded for 1 1/4 tubing (See No. 242)
Images
45-Degree Partition Clamp, #237-A
ILLUSTRATION AT LEFT Shows a public school installation with diagonal bracing and spiked combing on the top rail. For continuous partition 7/8" to 1 1/4" thick, tubing connection threaded for 1 1/4" tubing. (See No. 242)
Images
Spiking Combing, #249
Used in school building to discourage acrobatics on the rail. In one foot lengths, 1/2" high, 1/2" thick at base. Supplied with machine screws; rail is drilled and tapped after installation.
Images
45-Degree Wall Flange, #55-A
Tubing connection slip fit, with set screw for 192 (1 1/4" dia.) tubing.
Images
45-Degree Wall Flange, #50
For No. 191 (1 1/8" dia.) tubing at right angel to partition. For partition thickness 7/8" to 1 1/4".
Images
Tube Tie, #53
For No. 191 (1 1/8" dia.) tubing at right angel to partition. For partition thickness 7/8" to 1 1/4".
Images
Tube Tie, #51
For No. 191 (1 1/8" dia.) tubing in line with partition. For partition thickness 7/8" to 1 1/4".
Images