White Racker
Co.
420 S. Lively
Boulevard
Elk Grove Village, IL 60007
Phone: 847-758-1640
Fax:
847-758-1741
|
Modern Stall Fittings
| |
Square Top Rail
No. 16 B & S
Gauge, cut to dimensions as specified. Can be slotted to receive front stiles.
Heavier gauges are available upon request, but require special handling and
extra expense.
|
| |
Item
# |
Item |
Description |
|
| |
908 |
Square Top
Rail |
1 1/4" x 1 1/4". For use over 1 1/4" thick stiles. |
|
| |
908-A |
Square Top
Rail |
1 1/8" x 1 1/8". For use over 1 1/8" thick stiles. |
|
| |
908-B |
Square Top
Rail |
1 1/2" x 1 1/2". Usually slotted to receive front stiles.
stiles. |
|
| |
|
|
|
|
| |
End
Partition Top Channel No. 907
Made to fit over
end partition which is carried up a half-inch higher than stile, for 7/8" or 1"
thick partitions only. A steel bar extends continuously though the channel and
is attached with machine screw to the No. 904 Stile Clamp in front and imbedded
into the wall at the back of the partition. When ordering, specify distance
from back of stile to face of wall. |
| |
| |
Item
# |
Item |
Description |
 |
902 |
Wall Stile
Clamp |
Made for 1 1/4" thick stiles only. Length 4 inches. |
 |
903 |
Center Stile
Clamp |
Made for 1 1/4" thick stiles only. Length 3 inches. This is usually
imbedded into the wall 1 inch, leaving 2 inches exposed. |
 |
904 L.
H. |
End Stile
Clamp |
For left hand corner. Made for 1 1/4" thick stiles and partitions
7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8",
side 3 5/8" in width, height 2 3/4". |
 |
904 R.
H. |
End Stile
Clamp |
For right hand corner. Made for 1 1/4" thick stiles and partitions
7/8" or 1" thick. No bolt through partition. Overall dimensions front 2 5/8",
side 3 5/8" in width, height 2 3/4". |
 |
912 |
Tee
Clamp |
For 1 1/2" stile and 7/8" or 1" partition, used with No. 907
Channel. |
 |
913 |
Tee
Clamp |
For adjoining stiles, 1 1/4" both ways. |
 |
914 |
Corner
Clamp |
For adjoining stiles, 1 1/4" both ways. |
 |
910 |
Wall
Flange |
For No. 908 Top Rail. Overall Dimensions 3 1/4" x 3 1/4". |
 |
911 |
Wall Stile
Clamp |
with expansion anchor. For 1 1/4" stiles only, width 2". Used in
place of No. 902 when wall stile is not let into the wall, as with glazed brick
walls. |
 |
1003 |
Top
Brace |
Overall dimensions 4 1/4" high x 4 1/2" wide, made for 7/8" thick
partitions only. |
 |
1002 |
Double
Angle |
Dimensions 4 1/4" x 1 3/4" x 1 3/4". |
|
|
|
|
|
|